A SERVICE OF

logo

Open as PDF
next previous
480846-en-EU_V4.3 09/14
7
Alarm Limit Value (ALARM)
The alarm limit value is used to monitor the display value automatically. It controls
alarm indication function. The alarm limit value can be edited in the display V/m unit.
NOTE:Alarm Limit Function is only used for total three axial value comparator.
Setting the units of measurement
Press the UNIT key to step through the units display.
UNIT
UNIT
UNIT
Z
X Y
X Y
Z
(
a
)
UNIT
(
b
)
(
d
)
(
c
)
2
Z
X Y
2
Z
X Y
(a). Electric field strength (V/m).
(b). Computed magnetic field strength (mA/m).
(c). Computed power density (mW/m
2
).
(d). Computed power density (W/cm
2
).
Setting the result mode
Instantaneous result mode is automatically set when the meter is turned on.
Press the MAX/AVG key to step through the results displays:
AVG
MAX
MAX
AVG
MAX
AVG
MAX
AVG
AVGMAX
MAX
AVG