EPHD04+ HDcctv DVR
4. Change the section to different mode (with a different color) by clicking on the first
block of the section. The color switches from gray -> orange -> gray, every time user
clicks the first block of a section. Orange indicates ‘alarm action recording ON’.
5. To set the end of a timezone, select the time block following the end of the timezone
defined in the step above. The first click will highlight the block in blue. A second click
will toggle the state/color of that block and the remainder of the time bar, ending the
above defined timezone
Alarm Action Setting from front panel
1. Enter Alarm Action setting mode: highlight the “Alarm Action: menu choice and press
the “Enter” button to enter Alarm Action setting mode. At this time, the whole editing
area at the right side will be highlighted with a blue frame.
2. Enter alarm selection mode: Use the Jog wheel to switch to Alarm selection mode. The
Alarm channel will be highlighted with a blue frame.
3. Selecting alarm: Use the Shuttle wheel to select an alarm number to be configured.
Selected alarm number will be highlighted with a blue frame.
