A SERVICE OF

logo

CAN
Cancel Line
Format :
ASCII code:
CAN
Decimal :
24
Hexadecimal: 18
Control:
CTRL X
Comments:
Removes all text in the print buffer, but does not affect control
codes.
ESC EM
Cut Sheet Feeder Control
Format:
ASCII code: ESC EM (n)
Decimal:
27
25 (n)
Hexadecimal: 1B
19 (n)
Comments:
Used with the optional cut-sheet feeder. When n = 0 the feeder is
turned off, when n = 4 it is turned on. Using DIP switch 1-3 pro-
duces the same effect.
l
Epson only.
ESC 8
Disable Paper-out Sensor
Format:
ASCII code: ESC
Decimal:
27
Hexadecimal: 1B
Comments:
8
56
38
Turns off the paper-out sensor so that you can print to the end of a
single sheet of paper. This command duplicates the function of DIP
switch 1-2. Computer systems that monitor printer cable pin 12 will
ignore both ESCape
8
and
the
setting of switch
1-2.
If you have such
a system and want to print on the bottom two inches of a sheet of
paper, there are two solutions to this problem. Buy a computer
cable designed to overcome the problem; or use longer paper as a
backing sheet.
G-32