Error messages
For a complete list of error messages, see your Printer Guide.
Control Panel Messages
Control Panel Messages
Message Light Explanation or response
READY Pause light off Printer is ready to print.
PRINTING Pause light flashing Printer is receiving data.
RESET All lights flash briefly Printer is resetting.
PRESS PAUSE BUTTON Pause light on Press the Pause button to continue.
PLEASE WAIT Pause light flashing Printer is initializing or performing maintenance. Wait
until READY appears.
PAUSE Pause light on Printer is paused. To resume printing, press the
Pause button.
CUTTING Printer is cutting the paper.
CHARGING INK Printer is charging the ink delivery system. Wait until
READY appears.
Status messages
These messages indicate normal phases of printer operation.
Continue
▲
Response
Replace ink cartridge(s) indicated
on LCD. See page 5.
Replace ink cartridge(s) indicated
on LCD. See page 5.
Make sure the right paper is loaded
and the paper source setting is the
same on the control panel and print
options.
Move the paper lever to the
secured position.
Make sure paper is loaded correctly
and the paper lever is secured. If
you’re using cut sheets, make sure
the paper is flat.
Replace the maintenance tank. See
page 7.
Explanation
Ink cartridge(s) are nearly
empty (printing continues).
Ink cartridge(s) are empty
(printing stops).
The paper source setting in
print options is different
from the control panel setting.
The paper lever is in the
released position.
The printer cannot detect
the paper.
The maintenance tank is full.
Light
Ink light flashing
Ink light on
Paper light on
Paper light on
Paper light on
Ink light on
Message
INK LOW
INK OUT
CHANGE PAPER
TYPE
LOAD PAPER
SET PAPER LEVER
RELOAD PAPER
MNT TNK FULL
8
