34 - Connecting the projector to a computer
Connecting the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same
way as a wireless mouse.
Connect the computer's mouse port to the projectors Mouse #1/2 ports with the use of a mouse
cable. Use the Mouse #1 port when the Computer #1 port has been connected, and the Mouse
#2 port when the Computer #2 port has been connected.
Point
· Only the USB standard mounted model supports USB Mouse Cable connections. In the
case of Windows, only the Windows 98/2000 preinstalled model is supported. Operations
cannot be guaranteed on upgraded Windows 98/2000 environments.
· Only a computer mouse connected to the mouse/com port can be used.
· There are cases where the computer must be set up to use a mouse. Refer to the instruc-
tion manual for the computer for further details..
· Switch off the power to the projector and computer before making the connection.
· It is necessary to reboot the computer if it does not work.
· Consult with your vendor if you wish to use a serial mouse, or an ADB mouse on a Macin-
tosh.
Computer Mouse to use Mouse cable to use
PC/AT
DOS/V
PS/2 mouse PS/2 mouse cable (supplied)
USB mouse USB mouse cable (supplied)
Macintosh USB mouse USB mouse cable (supplied)
Mouse #1/2 portsPS/2 connection
Mouse port
Mouse cable (refer to the above table and
select the cable supplied with the projector .)
