
18
Conversion from Natural to LPG Gas
IMPORTANT
The replacement/conversion of the gas hob should
only be undertaken by a CORGI registered engineer.
It is important to note that this model is designed for
use with natural gas but can be converted for use with
butane or propane gas providing the correct injectors
are fitted. The gas rate is adjusted to suit. The oven
burner does not need any primary air regulation.
Replacement of gas oven
burner nozzle
To replace the gas oven nozzle, follow this procedure:
a) remove the bottom of the oven;
b) undo screw a and b and take the oven burner
out;
c) with a socket spanner 7 unscrew and remove the
nozzle, situated in the bottom of the oven, and
replace it with the correct one (see Table on this
page);
d) reassemble the burner following the same proce-
dure backwards.
a
b
Fig. 9
TYPE OF GAS NOZZLES NOMINAL POWER IN REDUCED BY-PASS GAS NOMINAL MIN MAX
1/100 MM POWER POWER 1/100 MM PRESSURE PRESSURE PRESSURE
KW m
3
/h g/h (KW) (mbar) mbar mbar
114 2,7 257 - 1,1 Reg. 20 17 25
78 2,5 - 182 1,1 52 30 20 35
78 2,5 - 179 1,1 52 37 25 45
Natural gas
(G20)
Butane
(G30)
Propane
(G31)