Eiki International LC-WB42N Manual

Open as PDF

next previous

Appendix

 –Checktheconnectionbetweenyourcomputerorvideoequipment

   andtheprojector.Seepages17-19.

  –Seeiftheinputsignaliscorrectlyoutputfromyourcomputer.Some

   laptopcomputersmayneedtochangethesettingformonitoroutput

  whenconnectingtoaprojector.Seeyourcomputer’sinstruction

   manualforthesetting.

  –Ittakesabout30secondstodisplayanimageafterturningonthe

   projector.Seepage21.

  –ChecktheInputsignal,colorsystem,videosystemorcomputer

systemmode.

  –MakesurethetemperatureisnotoutofthespecifiedOperating

   Temperature(41˚F–95˚F[5˚C–35˚C]).

  –WhenNoShowfunctionisoperating,theimagecannotbedisplayed.

PresstheNOSHOWbuttonoranyotherbuttonontheremotecontrol.

 –Checktheaudiocableconnectionfromaudioinputsource.

  –Adjusttheaudiosource.

  –PresstheVolume+button.Seepage27.

  –PresstheMutebutton.Seepage27.

 –WhentheAUDIOOUTisplugged-in,theprojector'sbuilt-inspeaker

   isnotavailable.      

  –Istheimageprojected?Youwillhearthesoundonlywhentheimage

 isprojected.

 –ChecktheInputsignal,colorsystem,videosystemorcomputer

   systemmode.      

  –MakesureBlackboardisnotselectedonImageselect 

   menu.Seepages36,43.

 –ChecktheDisplayfunction.Seepage49.



 

  –ChecktheInputsignal.AutoPCadj.functioncannotworkwhen

 480p, 575p, 720p, 480i, 575i, 1035ior1080iisselected. 

Seepage33.

 –Theiconisnotavailableingrayoutwhenthedigitalsignalisinput.

  –MakesureyouselectedStoreafteradjustingsetting.Somesettings

   cannotbestoredifnotregisteredwithStore.Seepage38,45.

  –PowermanagementfunctioncannotworkwhileFreezeorNo

Showfunctionisrunning.Seepage56.

  –Checktheconnectionandtheinputsignaltoseeifthereissignal.

  –MakesureOffisnotselectedatanyfunctionof"Autosetup".

Seepage48.

–MakesureOnisnotselectedattheCeilingfunction.Seepage53.

 –MakesuretheAutokeystonefunctionisnotsetto

Manual.Press

  theAUTOSETUP/CANCELbuttononthetopcontrol.Seepages26,48.

No image

No sound

The color is strange.

Some displays are not seen during

the operation.

Auto PC adjustment function does

not work.

The setting does not remain after

turning off power.

Power management does not work.

Capture function does not work.

Auto setup does not work properly.

Auto keystone function does not

work even when the projector is

tipped.

Appendix