11
CHASSIS: 11 GA - rectangular tube, 7 GA reinforcement
SEAT: Designed for operator comfort with padded back and arm rests. Seat is adjustable
fore and aft. Mounted on operator suspension system with damper.
MOWER DECK: 2 Decks are available. Both decks are made of 10 GA fabricated welded
construction with 1/4 " reinforcement plate. 3 blades combine for either a 60"
or 72" cut width. Deep deck with discharge tunnel. Cut height approximately
1.5" to 6" via 10 position lift handle.
BLADE DRIVE: "V" Belt with Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear BDP pump and White
CE wheel motor.
ENGINE: 26 HP Briggs & Stratton Vanguard 950D, 3 cylinder in-line, water cooled, diesel,
horizontal shaft, pressure feed lubrication with spin-on oil filter, fuel filter with
primer pump and water separator, paper element with cyclone pre-cleaner.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking brake, blade drive
clutch and control levers.
TIRES: Front 13-6.5x6
Rear 23-10.5x12
RECOMMENDED Front 16-20 lbs.
TIRE PRESSURE: Rear 8-14 lbs.
CAPACITIES: Fuel - 11 gallons (approx)
Hydrostat oil system - 4 quart with in-line 25 micron filter
Hydrostat oil recommendation - SAE 20W50 motor oil
Engine - 3.5 quart. CF/CF4 10W30 motor oil
Coolant capacity - 2 gallons 50/50 mix
DIMENSIONS: Width 73.5"(60" Deck), 85.5"(72" Deck)
Height 54"
Length 93"
Weight 1330 lbs.(60" Deck), 1364 lbs.(72" Deck)
NOTE: Additional information provided in service instructions under the individual
component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS
8000 Series (Diesel Version)
