51
ENGLISH
REFERENCE:
• In the display of gamma correction, the horizontal axis indicates the brightness
level of the image that is recorded on the disc, and the vertical axis indicates the
brightness level of the image when it is output from this unit.
• When bright points of the disc side are adjusted to the “dark” of the output side,
the fine parts of the bright portion that normally become hard to see, become an
easily discerned image.
• When dark points of the disc side are adjusted to the “bright” of the output side,
the fine parts of the dark portion that normally become hard to see, become an
easily discerned image.
When the Display Position is Selected and Adjusted:
• Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor
buttons (
0, 1), set the adjustment value with the
(•, ª) cursor buttons, and press the ENTER
button.
SETUP LEVEL (0 IRE, 7.5 IRE)
• This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
• A 15-step portion of position adjustment is
permitted left and right.
V. POSITION (–3 to +7) (Factory default: 0)
• A 11-step portion of position adjustment is
permitted up and down.
7
✽
To exit the picture adjust mode
Press the PIC.ADJ button.
Remote control unit
Remote control unit
