52
Listening to HDRadio stations
n Changing the tuning mode (Tune Mode)
You can change the mode for tuning into FM/AM broadcasts.
1
Press TUNER to switch the input
source to “HD Radio”.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Tune Mode”,
then press ENTER.
GTV ScreenH
TUNE+/-
STEREO
HD-AUTO
CH / OPTION
HD Radio
CH 1
FM 87.50MHz
Now Playing
Tune Preset Option
Option
FM/AM
Direct Tune
Preset Memory
Tune Mode
Auto Preset Memory
Preset Name
Preset Skip
All Zone Stereo On
GDisplay of this unitH
*OPTION
Tune Mode
4
Use o p to select tuning mode, then press ENTER.
GTV ScreenH
TUNE+/-
STEREO
HD-AUTO
CH / OPTION
HD Radio
CH 1
FM 87.50MHz
Now Playing
Tune Preset Option
Tune Mode
Auto
GDisplay of this unitH
Mode
• Auto –
Auto
Automatically tune to the station.
HD-Auto
Automatically tune to the HDRadio station.
Analog-
Auto
Automatically tune to an analog station and analog
HDRadio station.
Manual
Manually tune to the station.
Analog-
Manual
Manually tune to an analog station and analog HDRadio
station.
When tuning in stations manually, press and hold TUNE + or TUNE– to
change frequencies continuously.
n Selecting audio programs
HDRadio Technology enables stations to broadcast multiple Audio
Program and data services on HD2 / HD3 / HD4 channels.
1
Select the tuning mode
(“HD-Auto”, “Auto” or
“Manual”).
2
Press TUNE + or TUNE – to tune
in the desired Multicast channel.
•If the station you are tuning in has multiple audio programs,“HD1”is
indicated on the display.
If it only has one audio program, “HD” is indicated.
•When the unit receives multicast channels, the multicast program
number (HD2) is displayed to the right of the station name.
NOTE
•This function is not available for AM HDRadio stations because they
cannot broadcast multicast channels.
•If digital audio data cannot be received after the station is selected,
or if the station signal is weak, the unit may not be able to receive
the multicast channels.
•If the station signal is weak, the digital audio of the multicast channel
may cut out.
n Changing the screen display duration
Make this setting at “Now Playing” (vpage133) in the menu.
The default setting is “Always On”.
When “Auto Off” is set, the on-screen display is turned off 30
seconds after an operation.
Press uio p while the display is off to return to the original
screen.
