Physical Characteristics
Environmental
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
110 V: 30 A (Max.)
220 V: 60 A (Max.)
l D-sub: blue connector
l DVI-D: white connector
l D-sub: Detachable, Analog, 15pin, shipped attached to
the monitor
l DVI-D (Optional): Detachable, Digital, 24pin, shipped
detachedfromthemonitor
384.36 mm (14.990 inches)
522.24 mm (20.560 inches)
222.635 mm (8.765 inches)
Dimensions (without stand)
313.71 mm (12.351 inches)
522.24 mm (20.561 inches)
Weight of Monitor and Stand Assembly
Weight without stand assembly
(For wall mount or VESA mount considerations -
no cables)
0°to40°C(32°to104°F)
Storage:0°to60°C(32°to140°F)
Shipping: -20°to60°C(-4°to140°F)
10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
3,657.60 m (12,000 ft) max
154 BTU/hour (maximum)
119 BTU/hour (typical)