Before Assembly
1. Make sure that the fan voltage (120) is compatible with your own electrical
system.
2. Check to make sure that your carton contains all the parts mentioned in the
parts list.
NOTE: e box can be used as a work space to prevent any damage on the
ornamental surface.
CAUTION: Before installing, choose a location for mounting the fan where
the blades have at least 7 feet of clearance from all objects and floor. Mount an
outlet box to the ceiling or use an existing box
CAUTION: Do not mount fan to sheet rock or drywall type materials. To
insure proper support, use the two #1 wood screws to secure mounting bracket
to joist or beam. If the location you choose does not have a suitable support
beam, install a 2”x 4” brace between ceiling joists to support.
S1
S4
S2
S3
S5
S7
S6
S8
Hardware
Inventory
Tools you Need
1. Phillips Screwdriver
3. Adjustable Wrench
2. Flat Screwdriver
4. Wire Strippers
Screw Package
S1. Wood Screws & Washers
S2. Bracket Screws & Washers
S3. Blade Screws & Rubber Washers
S4. Motor Screws
S5. Wire Connectors
S6. Safety Bolt & Nut
S7. "J" Hook
S8. Zip Tie
Quantity
2
2
16
11
3
1
1
1
What You Have
Parts
1. Mounting Bracket
2. Down Rod Assembly
2” & 6” Rod Supplied
3. Canopy
4. Flange Cover
5. Fan Housing & Motor
6. Light Kit with Glass
7. 60W Candlebra bulbs
8. Blades Arms
9. Blades (Sold Separately)
10. Wall Control
11. Remote Control
1
2
4
5
7
Quantity
1
2
1
1
1
1
3
5
5
1
1
3
8
10
11
9
6
2
