3-7
Cisco IP Phone Productivity Services User Guide
78-13565-01
Chapter 3 Using Cisco IP Phone Productivity Services
Logging in to Cisco IP Phone Productivity Services
b. If you are using someone else’s Cisco IP Phone:
–
Use the << soft key to backspace and delete the displayed UserID.
–
Enter your UserID.
To enter your UserID, enter the letters of the alphabet using your dialing
pad. Press the phone key associated with a letter. To scroll through the
letters associated with each key, press the key rapidly. For example, press
2 to display the letter “a.” To enter the letter “b,” press 2 again without
pausing. Press the << soft key to back up.
–
Enter your PIN using the dialing pad.
–
Press the Submit soft key.
• If you logged in correctly, the phone displays:
Login successful for user <your user name> Please wait
Redirecting.....
• If you have made an error entering your information, the phone displays:
Login failed for user <userID>. Please make sure the UserID and
PIN are correct.
Re-enter your information. Contact your system administrator if you continue
to have password problems.
After you log in successfully, the Cisco IP Phone Productivity Services main
menu displays (see
Figure 3-2).
You are now ready to use your Cisco IP Phone Productivity Services.
Proceed to:
• Using CalendarView, page 3-9
• Using MailView, page 3-24
• Using Contacts Synchronization, page 3-37
Or, to log out of Cisco IP Phone Productivity Services, go to the “Ending a
Session” section on page 3-8.
Related Topics:
• Accessing Cisco IP Phone Productivity Services, page 3-4
