1-15
Cisco CGS 2520 Hardware Installation Guide
OL-31444-01
Chapter 1 Product Overview
Management Options
• Two low-voltage DC
• One high-voltage AC or DC and one low-voltage DC
For information on installing the power supply modules, see the “Power Supply Installation” section on
page 3-1
See Table 1-4 for information on the power supply LEDs.
Management Options
• Device manager
You can use the device manager in the switch memory to manage standalone switches. For
information, see the switch getting started guide and the device manager online help.
• Cisco IOS CLI
You can configure and monitor the switch from the CLI. Connect your management station to the
switch console port or use Telnet from a remote management station. See the switch command
reference on Cisco.com for information.
• CiscoWorks application
The CiscoWorks LAN Management Solution (LMS) is a suite of management tools that simplify the
configuration, administration, monitoring, and troubleshooting of Cisco networks. See the LMS
documentation for information:
http://www.cisco.com/en/US/products/ps7198/tsd_products_support_series_home.html
• CiscoView application
The CiscoView device-management application displays a switch image that you can use to view
switch status and performance information and to set configuration parameters. The CiscoView
application (sold separately) can be a standalone application or part of a Simple Network
Management Protocol (SNMP) platform. For information, see the CiscoView documentation:
http://www.cisco.com/en/US/products/sw/cscowork/ps4565/tsd_products_support_series_home.ht
ml
