A SERVICE OF

logo

2-591
Catalyst 6500 Series Switch Command Reference—Release 7.6
78-15328-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set spantree portfast
This example shows how to enable the spanning tree PortFast-start feature on the trunk port:
Console> (enable) set spantree portfast 3/2 enable trunk
Warning: Connecting layer 2 devices to a fast-start port can cause temporary spanning tree
loops. Use with caution.
Spantree port 1/2 fast start enabled.
Console> (enable)
Related Commands show spantree portfast