A SERVICE OF

logo

Open as PDF
next previous
MSP-MC1 Installation Instructions
4
INSTALLATION
NOTE: The installation of the MSP-MC1 assumes that a
Fusion rail mount has already been installed following
the installation instructions included with the mount.
1. Attach the top bracket (B) to rail of mount. (See Figure 1)
NOTE: The MSP-MC1 may be attached to the top rail of a
landscape rail mount where the rail has been moved to
one side, OR may be attached to the center of the
portrait mount lower rail. (See Figure 1)
Figure 1
2. Add and loosely tighten two 10-24 x 3/8" Phillips head
screws (E) through the top bracket (B) to the rail mount.
(See Figure 2)
Figure 2
3. Attach removable bracket (A) to CPU using four M3 x 8mm
Phillips head screws (D). (See Figure 3)
Figure 3
(B)
1
Landscape Rail
Mount System
Portrait Rail
Mount System
(B)
(B)
2
(E) x 2
(B)
Fusion
rail mount
[Landscape Rail
Mount shown]
CPU
3
(D) x 4