DMX-1655 Manual Version 1.11 11
1111
11
NOTE!
Chauvet’s CA-8 Easy Controller offers a simple, yet effective means of selecting various other
automatic program functions not directly available through the control panel. Please read the area
labeled “CA-8 Easy Controller”
Slave & 2 Light Show operation
1. Press the MENU button until the display reads- .
2. Press the ENTER button to select Slave Mode. The selection is confirmed when
begins to blink. You must make a selection within 8 seconds.
3. Press the UP and DOWN buttons to toggle between the 2 slave modes.
4. Press the ENTER button to activate selection.
(Normal) Synchronized movement of the fixture.
(2 Light Show) Pan & tilt will be inverted on this fixture. All other programs will execute in
sync.
NOTE!
Slave mode can only be assigned when the fixture is presently connected to other fixtures.
Color presets
The Legend 250RX provides 2 color preset modes. This affects the way you call colors on
the slider on a DMX controller.
1. Press the MENU button until the display reads- .
2. Press the ENTER button to select Color Mode. The selection is confirmed when
begins to blink. You must make a selection within 8 seconds.
3. Press the UP and DOWN buttons to toggle between the 2 Color Modes, Normal
and Split Colors .
4. Press the ENTER button to activate selection.
Normal color mode provides indexed color presets. Only solid colors will appear as you
move the channel fader on a controller.
Split color mode provides indexed solid and split color presets. Both will appear as you
move the channel fader on a controller.
NOTE!
A color scrolling preset exists in both modes. This is when the color wheel begins to rotate
continuously and you can select the rate of speed, for a rainbow color like affect.
Pan invert
1. Press the MENU button until the display reads- .
2. Press the ENTER button to select Pan Invert. The selection is confirmed when
begins to blink. You must make a selection within 8 seconds.
3. Press the UP and DOWN buttons to toggle between Normal and
Inverted .
4. Press the ENTER button to activate selection.
Normal pan movement
Pan movement inverted
