5. Connect the camcorder with the device.
5-1. iOS/Android device: Activate Wi-Fi in the settings screen.
- The network names of detected access points will appear.
5-2. iOS/Android device: Touch the access point with the same SSID displayed in step 4.
5-3. iOS/Android device: Enter the camcorders password set previously.
- If you have performed this procedure before and you have not changed the camcorder's password, the
connection will be established automatically.
6. iOS/Android device: Open the web browser and connect with the camcorder.
Enter the URL displayed on the camcorders screen into the Web browser to start the Wi-Fi
Remote application.
- The Wi-Fi Remote screen will appear.
- As long as you do not change the port settings, the URL is always the same so you may find it
convenient to bookmark it.
7. Camcorder: Touch [ ] to close the screen.
- When the connection has been established, [ ] appears on the camcorders screen. If an iOS or
Android device is not connected, the icon will appear in yellow.
8. iOS/Android device: Operate the controls on the screen while viewing the image from the camcorder.
9.Camcorder: Touch [FUNC.] > [Wi-Fi Remote] and then touch [Off] when finished.
The Wi-Fi Remote application will end.
