
29
Charging the Battery Pack
3 Attach the battery pack to the camcorder.
•Press the battery pack softly into the battery attachment unit and
slide it up until it clicks in place.
4 Charging will start when the camcorder is turned off.
• If the camcorder was on, the green POWER/CHG indicator will
go out when you turn off the camcorder. After a moment, the
POWER/CHG indicator will turn on in red (battery pack charging).
The red POWER/CHG indicator will go out when the battery
pack is fully charged.
• If the indicator flashes, refer to Troubleshooting (A 249).
• Fully charging the supplied battery pack will take approximately
5hours and 35 minutes (7 hours and 45 minutes for the BP-727
Battery Pack supplied with the E only).
To remove the battery pack
1 Slide d in the direction of the arrow and hold
it pressed down.
2 Slide the battery pack and then pull it out.
4
3
34