215
ç Contents
Shots look grainy.
● Lower the ISO speed (
=
102).
Subjects are affected by red-eye.
● Set [Red-Eye Lamp] to [On] (
=
80) to activate the red-eye reduction
lamp (
=
4) in ash shots. Note that while the red-eye reduction lamp
is on (for about one second), it is not possible to shoot, because the
lamp is counteracting red-eye. For best results, have subjects look at the
red-eye reduction lamp. Also try increasing the lighting in indoor scenes
and shooting at closer range.
● Edit images using red-eye correction (
=
158).
Recording to the memory card takes too long, or continuous
shooting is slower.
● Use the camera to perform low-level formatting of the memory card (
=
171).
Shooting settings or FUNC. menu settings are not available.
● Available setting items vary by shooting mode. Refer to “Functions
Available in Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab”
(
=
225 –
=
230).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card
that supports high-speed recording. Note that even if the elapsed
time display is incorrect, the length of movies on the memory card
corresponds to the actual recording time (
=
170,
=
242).
[ ] is displayed and shooting stops automatically.
● The camera’s internal memory buffer lled up as the camera could not record
to the memory card quickly enough. Try one of the following measures.
- Use the camera to perform low-level formatting of the memory card
(
=
171).
- Lower the image quality (
=
74).
- Switch to a memory card that supports high-speed recording (
=
242).
Downloaded From camera-usermanual.com Canon Manuals
