Chapter 2
38 Chapter 2
Copying
Copying
Making Copies
This section describes the basic procedure to make copies.
1 Prepare for copying.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 17.
(2) Press [COPY].
(3) Load paper.
See “Loading Paper” on page 19.
(4) Ensure that the proper paper source is selected.
See “Changing the Paper Source” on page 23.
2 Start copying.
(1) Check the page size and media type.
(2) Use [ ] or [ ] to specify the number of copies.
The following information is displayed as well.
(3) Load the document on the Platen Glass.
(4) Press [Color] for color copying, or [Black] for black & white copying.
The machine starts copying.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit
when feeding paper from the Cassette.
Note
Press [Settings] to check or change the page size, media type, or other
settings. See “To Change Print Settings” on page 34.
Intensity: Pressing [ ] decreases the intensity, and pressing [ ] increases the
intensity.
You can also use the auto intensity. See “Print Setting Items” on page 35.
Note
For information on the types and conditions of documents which you can
copy, see “Loading Documents” on page 18.
Note
To cancel copying, press [Stop/Reset].
(1)
(2)
