Setting Up Polling Sending
8-16
8
Using Polling
8
Press [▼] or [▲] until <1.FILE NAME> appears ➞ press [Set].
9
Enter a file name for the polling box (up to 24 characters and
spaces) using the numeric keys ➞ press [Set].
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
10
If you want to set a password to protect the polling box, press
[
▼] or [▲] until <2.PASSWORD> appears ➞ press [Set].
If you do not want to set a password, proceed to step 12.
11
Enter a password (up to seven digits) using the numeric keys
➞ press [Set].
NOTE
• If you set the polling box number to ‘00’ for a party whose fax machine does not
support ITU-T subaddress/password transactions, you do not have to register a
subaddress or TX password. Proceed to step 16.
• This password protects your polling box settings from unauthorized access. To
change these settings later, you will have to enter this password.
• If you make a mistake while entering the password, press (Clear)
➞
enter the
correct password.
➞
➞
➞
➞
Set
4
1
7
5
2
8
6
3
9
0
Set
Set
4
1
7
5
2
8
6
3
9
0
Set
C
