44 Routine Maintenance
z Press [Stop] to cancel the current print job.
When printing is finished, replace the FINE Cartridge immediately. If you continue printing with
an empty FINE Cartridge, it will be a cause of trouble.
z Setting Automatic Printing
When the ink is low, you can set the receiving fax either automatic printing or storing in memory.
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4 Use [{] or [}] to select <OPTION SETTINGS>, then press [Start/Copy]. The LCD
displays <OFF>.
z To disable ink low automatic printing, use [{] or [}] to select <OFF>, then press [Start/
Copy]. Press [Stop] to return to standby mode.
z To enable automatic printing, use [{] or [}] to select <ON> and continue with the steps
below.
5 Press [Start/Copy].
6 Press [Stop].
The fax returns to standby mode.
What is a Low Ink Warning?
The machine counts the amount of ink used and when the remaining level reaches a preset level
the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge
is running out of ink.
z When the <RECOMEND NEW CRT>, or <NO INK> message appears on the LCD.
The ink level of the FINE Cartridge showing <RECOMEND NEW CRT> is low. The ink level
of the FINE Cartridge showing <NO INK> is empty. You should ensure you have a new FINE
Cartridge.
z When the <INK VOL UNKNOWN> appears on the LCD.
Note
z If you continue printing when the ink level for the FINE Cartridge is low, the FAX may not print
out properly.
z When the ink level is low, the print quality may become poor, and the machine will start storing
incoming fax data in the memory.
z The FAX cannot detect whether or not the received data are clearly printed on the paper.
z The FAX automatically deletes the received fax data in the memory after printing them. We
recommend you to set <SAVE RX IMAGE> to <ON> (see page 39). You can store the received
fax data in the memory for no more than 30 transactions. Delete them before the memory
becomes full.
RECOMEND NEW CRT
]
NO INK
INK VOL UNKNOWN
