Video 81
NOTES
• When the audio level meter reaches the red point (0 dB mark), the
sound may be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator ( 143).
• We recommend using headphones ( 81) to check the sound level
while adjusting the audio recording level or when the microphone atten-
uator is activated.
• This function can also be assigned to the custom key/dial ( 85). In
that case, the audio level adjustment bar appears in white.
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/ terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to (headphones) output.
* Headphones can be used also in mode but the function of the terminal can-
not be changed in that mode.
[ Menu] [AV/Headphones]
[Headphones]
appears.
(33)
*
FUNC.
FUNC.
