88
The camera can reconnect to a smartphone for which connection
settings have been registered.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [q].
Select [q] (Connect to smartphone)
and press <0>.
3
Establish a connection.
Select [Connect] and press <0>.
On the confirmation dialog, select
[OK].
When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
4
Activate the smartphone’s Wi-Fi
function.
If the connection destination has
been changed, connect to the same
access point as the camera.
5
Start Camera Connect on the
smartphone.
A connection will be established.
Reconnecting
