![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/e2/7e2f728a-bec4-46dc-9544-d53be6bfaff1/7e2f728a-bec4-46dc-9544-d53be6bfaff1-bg69.png)
105
Custom Function Settings
Focusing point selection method
This converts the < > button or < > button into the < > button. You
can thereby position the focusing point selector according to your personal
preference. The < > dial can also be used to select a horizontal or
vertical focusing point.
C.Fn-11-1: This reverses the functions of the < > button and < > button.
Press the < > button, then turn the < > dial to select a horizontal
focusing point or turn the < > dial to select a vertical focusing point.
C.Fn-11-2: •
While exposure metering is active, turn the < > dial to select a
horizontal focusing point (if C.Fn-13-3 has
been set, select a peripheral focusing point).
To select a vertical
focusing point, hold down the < > button and turn the < > dial.
The focusing point selection stops at the extreme left, extreme right, top-
most, and bottom-most focusing points. The above operations are also
possible while you press the shutter button halfway during AI Servo AF.
•
During autofocusing, you can instantly switch to the automatic
focusing point selection mode by pressing the < > button.
• You can also select the focusing point (including automatic focusing point
selection) by using C.Fn-11-1 operations.
•If both C.Fn-11-2 and C.Fn-18-1/2 (
→109) have been set, select a
vertical focusing point by pressing the < > button and turning the
<> dial.
C.Fn-11-3: This reverses the functions of the < > button and < > button. Press
the < > button, then turn the < > dial to select a horizontal focusing
point or turn the < > dial to select a vertical focusing point.
C.Fn
C.Fn-11
Function
Focusing point
selection method
No.
0
1
2
3
<> + < >
<> + < >
<> + < >
<> + < >
<>
Stand-alone operation
<> + < >
<> + < >
<> + < >
↔
↔
↔
↔
↔↔↔↔
Description
C.Fn-11
SEC.07 P095-114 (E) 29-01-2003 12:29 Pagina 105