Chapter 12 Maintenance 12-13
Maintenance
4 Raise the blue cartridge lock lever on
the cartridge holder and remove the BJ
cartridge.
• Discard the old BJ cartridge immediately
according to the local laws and regulations
for disposal of consumables. You may want
to place it in a plastic bag to keep any
residual ink from spilling.
• Spilled ink can stain any surface; protect
yourself and your work area.
• If removing a BJ cartridge to use one of the
optional BJ cartridges, be sure to store the
BJ cartridge in the container provided with
your MultiPASS. Otherwise the ink will dry
and affect print quality.
5 Remove the new BJ cartridge from its
package, then remove the orange
protective cap q and tape w.
• Discard the cap and tape. Never attempt
to reattach them to the BJ cartridge print
head.
• Install the BJ cartridge immediately after
removing the cap and tape.
6 Insert the BJ cartridge into the
cartridge holder, then lower the blue
cartridge lock lever until it locks into
position.
