Settings Menu
3-34
3
Printer Settings Menu
Use Cover Inserter
On, Off
*
This setting enables you to specify whether to add a cover at the front of the
printed output.
If [On] is selected, a cover is inserted automatically at the front of the printed
output. If used in combination with Staple settings, it is a handy function for
arranging documents.
The paper to be used as the cover should be placed in the inserter.
IMPORTANT
Nothing will be printed on the paper used for the cover.
You cannot use this function in combination with 'Transparency Interleaving'.
This function cannot be used if the 'Finishing' is set to [Off], [Collate],
[Rotate+Collate], [Rotate+Group], [Offset+Group], or [Staple+Group].
NOTE
This function is available for selection if the Document Insertion/Folding Unit-F1 is
attached to the Finisher-AD1 or Saddle Finisher-AD2.
This function can be used in combination with [Staple+Collate], 'Punch', and
'Z-Fold'.
You can place the following paper sizes and types in the inserter:
- Paper sizes: 11" x 17", Legal, Letter, Letter-R, EXEC, A3, JIS-B4, A4, A4R,
JIS-B5, or JIS-B5R
- Paper types: Plain Paper, Recycled Paper, Color Paper, Letterhead, Heavy
Paper, Tab Paper, or Bond Paper
REPORT
3
2
REPORT
3
2
1
REPORT
3
2
1
1
REPORTREPORT
3
2
1
Paper placed
in the inserter
Output Paper On
