68
You can select the settings for various functions to suit your preferences. AE
stands for Auto Exposure.
Select the shooting mode.
● After pressing the 4 / E button, use the
qr buttons to select G and press m.
Adjust the settings according to
your purposes (pp. 68 – 77).
Shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 68)
• Select a higher ISO speed (p. 73)
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 3.2 m (1.0 – 10 ft.), and at
maximum telephoto, it is 30 cm – 2.0 m (1.0 – 6.6 ft.).
Select h.
● After pressing the r button, press the qr
buttons to select h, then press the m
button.
Once set, h will appear.
What if the shutter speed and aperture value are displayed
in red?
(EC256)_CDI-E404_Guide_E.book Page 68 Friday, February 6, 2009 7:44 PM
