109
You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
Press the
l
button, and switch
to the focus check display (p. 45).
X
A white frame will appear where the AF
frame or face was when the focus was set.
XA gray frame will appear on a face
detected during playback.
XThe area within the orange frame appears
magnified.
Switch frames.
● Move the zoom lever toward k once.
XThe screen shown to the left will appear.
● Press m to move to a different frame
when multiple frames appear.
Change the magnification level or
location.
●
Use the zoom lever to change the display
size, and the
opqr
buttons to change the
display position while checking the focus.
● Pressing the n button resets the
display to Step 1.
Checking the Focus
