2-7
Installation
Daughterboard Components
SMB-1 PROM
The 9G421-02/9G429-02 is shipped with an SMB-1 Firmware PROM located on
the underside of the daughterboard as shown in Figure 2-4.
To upgrade the SMB-1 PROM, refer to the SMB-1 PROM Upgrade Kit
instructions.
BOOT PROM
The 9G421-02/9G429-02 is shipped with a BOOT PROM located on the underside
of the daughterboard as shown in Figure 2-4.
To upgrade the BOOT PROM, refer to the BOOT PROM Upgrade Kit instructions.
FLASH SIMM
The 9G421-02/9G429-02 is shipped with a 4 MB FLASH SIMM located on the
underside of the daughterboard as shown in Figure 2-4.
To upgrade the FLASH SIMM, refer to the installation instructions included in the
FLASH SIMM Upgrade Kit.
DRAM SIMM
The 9G421-02/9G429-02 is shipped with 16 MB of DRAM located on the
motherboard. However if additional DRAM is desired, you can install a DRAM
SIMM in the socket on the underside of the moduleÕs daughterboard as shown in
Figure 2-4.
To install a DRAM SIMM, refer to the installation instructions included in the
DRAM SIMM Upgrade Kit.
