116 en | Configuring the AutoDome Junior HD AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11 Installation Manual Bosch Security Systems, Inc.
Enter a unique, unambiguous name for the camera in this field.
You can use both lines for this.
You can use the second line for entering additional characters;
these can be selected from a table.
1. Click the icon next to the second line. A new window with
the character map is opened.
2. Click the required character. The character is inserted into
the Result field.
3. In the character map, click the << and >> icons to move
between the different pages of the table, or select a page
from the list field.
4. Click the < icon to the right of the Result field to delete the
last character, or click the X icon to delete all characters.
5. Now click the OK button to apply the selected characters
to the second line of the Camera 1 parameters. The
window will close.
Initiator extension
You can attach your own text to the initiator name of the
AutoDome Junior HD to make the unit easier to identify in large
iSCSI systems. This text is added to the initiator name,
separated from it by a full stop. You can see the initiator name
in the System Overview page.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal
recording management and may therefore result in the Player or
Archive Player being unable to play back the recording.
