VEZ-400 Mini PTZ Dome On-Screen Display (OSD) Menu | en 55
Bosch Security Systems, Inc. User Manual F.01U.252.635 | 2.0 | 2011.09
7.10 Scan Setup
An Auto scan is a PTZ function that moves the camera from one
position to another position. The camera has a maximum of 8
programmable scans. The speed of Auto Scan can be changed
from 1 to 35 degree/sec. To set up (program) an auto scan:
1. From the MAIN MENU, select SCAN SETUP. The screen
SCAN SETUP appears.
2. Select the option "NO.###" to select a scan number.
3. Select the appropriate scan number.
4. Select the option "Edit."
5. Select the value "Edit Start Point." The screen Start
Position Setup appears.
6. Using the joystick, move to a desired target (Pan/Tilt/
Zoom) for the starting point of the scan.
7. Save the settings. The screen Stop Position Setup
appears.
8. Using the joystick, move to a desired target (Pan/Tilt/
Zoom) for the stopping point of the scan.
9. Save the settings.
10. Return to the previous screen.
11. Select the option "Speed."
12. Select the desired speed (from 1° to 35°/second).
SCAN SETUP
NO.
EDIT
SPEED
DTIME
DIRECTION
MODE
CLEAR
SAVE
BACK
