BMW Navigation Portable Plus Owner’s Manual 19
Using The Tools
E
N
2. Touch the rate you want to update.
3. Touch
to erase the current rate. Enter
a new rate, and touch �one.
4. Touch
Save to nish.
TIP: Touch Restore for original rate.
Unit Converter
1. Touch Tools > Unit Converter.
2. Touch
Conversion, select a type of
measurement, and touch OK.
3. Touch a unit of measure that you want to
change.
4. Select a unit of measure, and touch
OK.
Repeat, if necessary.
5. Touch the blank rectangle to enter a value.
6. Enter a value, and touch
�one.
7. Touch
Clear to enter another
measurement.
Using FM Trafc
Some nüvi packages provide trafc.
Use an FM TMC (Trafc Message Channel)
trafc receiver to receive trafc information
broadcast over the FM Radio Data System.
For information about FM trafc receivers and
coverage areas, see www.garmin.com/trafc.
NOTE: Garmin is not responsible for the
accuracy of the trafc information. The
FM trafc receiver simply receives signals
from the trafc service provider and
shows that information on your nüvi.
NOTE: The FM trafc receiver and nüvi
must be in data range of an FM station
transmitting TMC data to receive trafc
information.
NOTE: For BMW kits that include trafc,
you can only access the trafc information
if the nüvi is connected to the mount.
