English
-5-
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply
cord for signs of damage, ageing and
wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power-supply cord or mains plug is
damaged or defective it must be
repaired by the manufacturer or its
service agent or a similarly qualified
person in order to avoid a hazard. Do not
cut the power supply cord and do not
attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
• Do not attempt to repair the appliance.
Take it to your nearest Black & Decker-
owned or authorised Service Centre for
repair.
Electrical safety
This product must be earthed.
Always check that the power
supply corresponds to the voltage on the
rating plate.
Extension cables & class 1 product
A 3 core cable must be used as your tool is
earthed and of class 1 construction.
Additional safety instructions for
Toasters
• Do not immerse the appliance, cord set
or plug in liquids
• Always leave sufficient space around the
appliance for ventilation
• Do not use the unit if you have wet
hands or bare feet.
• “Switch off the appliance before
changing accessories or approaching
parts which move in use”.
• The bread may burn, therefore do not
use the toaster near or below
combustible material, such as curtains.
Assembly
This appliance is supplied fully assembled
& only requires parts to be cleaned before
use. See “Cleaning” for details.
Use
Place the bread to be toasted in the
Toasting slots (1). One or two slots may be
used at a time. Move the browning control
(5) to the required setting.
