Hot-Key-Command Shortcuts
Below is a complete list of hot-key commands that can be used for your Switch:
Command Function
Scroll Lock, Scroll Lock,
Switch to PREVIOUS ACTIVE port
Switch to NEXT ACTIVE port
Scroll Lock, Scroll Lock,
Switch to PREVIOUS BANK (By default,
selects first active port on the BANK)
Scroll Lock, Scroll Lock,
Switch to NEXT BANK (By default, selects first
Scroll Lock, Scroll Lock, Y
Directly switches to PORT Y on BANK 00
(single-switch configuration) (Y=01 to 16)
Scroll Lock, Scroll Lock,
Directly switches to PORT Y on BANK X
(daisy-chain configuration) (X=00 to 15),
Scroll Lock, Scroll Lock,
Monitor DDC2 (identifies monitor settings)
Scroll Lock, Scroll Lock,
Scroll Lock, Scroll Lock, F4
Enable AutoScan mode (refer to AutoScan
You will have approximately five seconds to complete each
Using the Switch from a Local Console
