Technical Aspects of your machine
Motor Unit
Handle
Exhaust Cover Locking / Unlocking Part
Exhaust Cover
Container
Container Locking / Unlocking Part
Wheels
Hose ‹nlet Part
Hose
Hose Outlet Part
Extension Tubes
Small Brush
Compact Head
Floor Brush
Crevice Tool
Air Distributing Part
Water Separator
Hepa Filter
Measuring Cup
Hepa filter cleaning brush
Spare hepa filter
Hepa filter sponge
Spare hepa filter sponge
1
2
3
4
5
6
7
8
9
Gross weight : 10.4 kg
Net weight : 8.6 kg
Voltage / Frequency : 220-240V~ 50/60 Hz
Adapter Isolation Class
:
Dimensions : 635 x 405 x 405 mm.
Power : 1800 W max.
Protection Class : IPX 4
Water/Liquid Suction Capacity
: 11 lt.
Using your machine
Preparation for Use
Fill 1,5 liters of water into the container.
The water level should not exceed the
“MAX” level indicated on the container.
Fit the air distributing part by sliding it
into its slot located on the container.
Put the water separator on the container
and place the HEPA filter on top of it.
Place the motor unit on the container
and secure it by locking the container
locking/unlocking parts on each side.
Connect the hose to the inlet socket
located on the container. Attach the
extension tubes, which have been
mounted to each other, to the hose
handle. You can connect only one
extension tube instead of two tubes or
you can attach the accessories directly
to the hose handle without using any
tube.
All declared values on the product and on the printed
leaflets are picked up after laboratory measurements
performed according to related standarts. These values
may differ upon usage and ambient conditions.
3 4
MAX.
2
14
1
19
16
15
13
12
11
10
9
8
7
6
5
4
3
21
20
18
17
23
22
Extension
Knob
10
11
12
13
14
15
16
17
18
19
20
21
22
23
(Figure 1) (Figure 2)
(Figure 3) (Figure 4)
(Figure 5) (Figure 6) (Figure 7)
(Figure 8) (Figure 9)
(Figure 10) (Figure 11)
(Figure 12) (Figure 13)
(Figure 14)
