A SERVICE OF

logo

3
Before beginning assembly of product, make sure all parts are present. If any part is missing or damaged, do not
attempt to assemble, install or use the product. Contact ATD Customer Service for replacement parts.
ASSEMBLY AND OPERATION INSTRUCTIONS (ref. Figure 2)
1. Insert Cylinder into hole of Base Tool Tray Assembly.
2. Place Seat on top of assembled Base Tool Tray/Cylinder.
3. Understand and follow all warning information. The Pneumatic Chair is NOT suitable for storing ammable,
combustible, or corrosive materials.
Read, understand, and follow all printed materials provided with and on this product before use.
Do not exceed rated capacity of 300 lbs. Rated capacity consists of: the user, tools, and equipment.
• Use on smooth, level, seamless surfaces only.
• Sit down gently. Avoid shock loads caused by jumping or falling onto seat.
• Components on this chair may present a pinch hazard. Exercise caution when opening/closing drawers.
• Do not stand on this product.
• Keep out of the reach of children. This device is not appropriate for children’s use.
! WARNING
Keep hands away from pinch and laceration hazards points that are created during use! Be alert
and sober when using this product! Sit centrally on seat pad ONLY. NEVER sit on edge!
!
MAINTENANCE
Wipe clean as needed. Use mild upholstery cleaner (not caustic) to clean seat if needed.
DO NOT lubricate casters!
!
Replacement Parts List
Item Part No. Description Qty
1 81048-A-ATD Seat Cushion 1
2 81048-B Cylinder 1
3 81048-C Casters 4
Figure 2 - Model ATD81048 Replacement Parts
1
3
2
REPLACEMENT PARTS
Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the creeper are
replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
When ordering parts, give model number, part number and description. Call or write for current pricing:
ATD Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel:(636)327-9050 Fax:(636)327-9046