REV.06‐09
Important
z The inverter is designed to operate from a 12-volt power source only. Do
not attempt to connect the inverter to any other power source, including
any AC power source.
z Do not attempt to extend or otherwise modify the 12-volt power cord attached to your
inverter.
z Improper use of your inverter may result in property damage, personal injury or loss of life.
A. ON/OFF Switch. The current flowing from the power source to the inverter is controlled by
this switch. It does not control the current flowing from the inverter to the appliance.
B. Overload LED Indicator Light. If the continuous power draw of the appliance(s) being
operated exceeds 1000 watts, this light will turn Red and the inverter will automatically shut
down. When this occurs turn off the inverter and determine the cause of the over load before
turning the inverter and the appliance back on.
C. Two Standard North American 110V AC Outlets.
D. High-Speed Cooling Fan. When the temperature inside the inverter exceeds the limits of
safe operation condition the Cooling Fan automatically turns on to cool the inverter. When
the temperature has lowered to a safe operating condition, the fan will shut off. The fan is
not designed to run continuously.
E. Power Input Terminal Red = Positive
F. Power Input terminal Black = Negative. Deep Cycle (marine) batteries generally have the
highest reserve ratings. They are also capable of withstanding repeated complete drains of
power and recharging. If you do not have a deep cycle battery we recommend that you run
the engine of your vehicle when operating the inverter.
G. Ground Terminal
H. Fuse case: Pull case cover to open the case and exchange fuse if fuse blows.
Selecting A Power Supply.
