ATD Tools ATD-5951 Manual

next previous

REV03‐13



ConnectingYourInverter



1. MakesuretheON/OFFrockerswitchlocatedonthefrontpaneloftheinverterisintheOFF(0)position.

2. Removeyourcigarettelighterandpushthe12voltpowerplugfirm lyintothecigarettelighterreceptaclein

yourvehicle.

3. TurntheinverterrockerswitchtotheON

(I)position.TheGREENLEDIndicatorlightshouldglow,confirming

thatthereispowerrunningtotheinverter.

4. Confirm that the appliance to be operated is turned OFF. Turn the inverter rocker switch to the OFF (0)

position.PlugtheapplianceintotheACreceptacleonthefrontpanel

oftheinverter. 

5. TurntheinverterrockerswitchtotheON(I)position.Turntheequipmentorapplianceon.

Note

• Useofanextensioncordfromtheinvertertotheapplianceorequipmentbeingoperatedwillnot

significantlydecreasethepowerbeinggeneratedbytheinverter.Forbestoperatingresults,theextension

cordshouldbenomorethan50feetlong.

• IfthegreenLEDblinkswhenyoufirst

turntheinverterON,thisindicate sthatthereisashortcircuitwithin

thepowersupply.TurntheinverterOFF.Removethe12voltplugfromthecigarettelightersocket,firmly

• Reinserttheplug,andthenturntheinverterONagain.Ifthisdoesnotremedytheproblemtry

usinga

different12voltpowersource.

