P/N 47-697-01 • 073004
Ampeg reserves the right to change specifications without notice.
Made with Pride in the U.S.A. by Ampeg • ©2004 Ampeg, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
Technical Specifications
System Block Diagram
OUTPUT POWER RATING 500 Watts @ 2 Ohms
350 Watts @ 4 Ohms
TONE CONTROL RANGE Bass: 16dB range @ 50Hz
Ultra Mid: +6dB @ 600Hz, -9dB @ 350Hz
Treble: 31dB range @ 5kHz
Ultra High: +8dB @ 10kHz
Ultra Low: +7dB @ 40Hz
SIGNAL TO NOISE RATIO 75dB typical
POWER REQUIREMENTS 120VAC, 60Hz, 545VA
100-120VAC 50/60Hz, 545VA
220-240VAC, 50/60Hz, 545VA
SIZE AND WEIGHT 19”W x 3.8”H (with feet) x 15.5”D; 32 lbs
www.ampeg.com
B500DR Programmable Bass Amplifier
Declaration of Conformity
Manufacturer’s Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500, UL60065, or UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
FCC standards 47CFR 15.107 and 15.109 Class A
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175
