A SERVICE OF

logo

Open as PDF
next previous
8
UK
tPress the OK button to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
8.4 LCD contrast
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “LCD CONTRAST”.
tPress the OK button
to confirm.
tPress the up
or down button to select your comfortable display viewing level (1-5). The default
setting is 3.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
8.5 Message length
To set the maximum recording time for each incoming message or memo message on the answering
machine.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “MESSAGE LENGTH”.
tPress the OK button
to confirm.
tPress the up
or down button to select 1 or 2 minutes.
>The default setting is 2 minutes.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
8.6 Rings to answer
To set the number of rings before the machine answers a call.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “RINGS TO ANSWER”.
tPress the OK button
to confirm.
tPress the up
or down button to select “TOLL SAVER”, “2”, “3”, “4”, “5”, “6”, “7” , “8” or
“9” rings.
>The default setting is 5.
>Use “TOLL SAVER” when checking your Voxtel C115 for messages from a remote location using
a long distance service or from a pay phone. The answering machine responds after the 2nd ring
only if you have a new message recorded. If there are no new messages, the phone will answer
after the 4th ring. You can then hang up after the 3rd ring to avoid paying for the call.
tPress the OK button
to confirm.
tContinue with programming, or press the stop button
to return to standby mode.
8.7 Remote access
The remote access requires a three-digit code that you need to enter if you call when away from home
to check your messages. The default is “321“. You can change it to any three digits you want.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up
or down button until de display shows “REMOTE ACCESS”.
tPress the OK button
to confirm.
>The current three-digit code is shown, with the first digit blinking.
tPress the up
or down button to set the first digit of the remote access code.
tPress the OK button
to confirm.
>The second digit of the code will be blinking.
tPress the up
or down button to set the second digit of the remote access code.