© Adam Equipment Company 2007
10
• Press the [Mode] key to store the desired setting and move to the
next function.
4.4 SDT = RS-232 CONTROL
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings.
1 Continuous output
2 Outputs under command from PC
3 Outputs weight when the scale is stable
4 Outputs complete data to printer when scale is stable
• Press the [Mode] key to store the desired setting and move to the
next function.
4.5 PAT = SETTING OF PARITY
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings.
8 n 1 - 8 data bits, no parity (default setting)
7 E
E E
E 1 - 7 data bits, even parity
7 0
0 0
0 1 - 7 data bits, odd parity
• Press the [Mode] key to store the desired setting and move to the
next function.
4.6 BPS = SELECTING BAUD RATE
• When this function is displayed with the current setting, press the
[Unit] key to change to the other settings. The options are 1200,
2400, 4800 and 9600 (default).
• Press the [Mode] key to store the desired setting.
• To return to weighing switch the scale off and then on again.
