A SERVICE OF

logo

3 Upgrading the system
50
8 Pull the HDD cable cage from the chassis.
To install a hard disk into the HDD cable cage
1 Remove the HDD cable cage from the chassis. Refer to the
instructions in the preceding section.
2 Remove the four screws that secure a previously installed hard disk
to the cage then pull it out.
3 Install a new hard disk into the cage then secure it with the four
screws you removed in the previous step.
4 Reinstall the HDD cable cage to the chassis. Refer to the
instructions in the subsequent section.
BB!H621!.!FO/cppl!!Qbhf!61!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN