24 CHAPTER 2: VCX V7000 BUSINESS TELEPHONE — MODEL 2102
102 or 103 Displays the volume setting for the current mode:
■ If the handset is in the cradle and the speaker is disabled,
displays the ring volume setting.
■ If the speaker is enabled, displays the speaker volume
setting.
■ If the handset is not in the cradle and the speaker is
disabled, displays the handset volume setting.
104 Enables or disables the speaker.
105* Enables or disables alphanumeric mode (required to dial a
URL).
200* Displays the phone’s IP address.
201* Displays the Gateway IP address.
202* Displays the Subnet Mask.
203* Displays the NCP IP address.
204* Displays the second NCP IP address.
205* Displays the PBX IP address.
206* Displays gateway IP address.
207* Displays subject information (if configured).
208* Enables or disables the camp-on feature (not supported in
this release).
209 Allows you to adjust the volume (using the Volume control
buttons) of the tone produced when a key is pressed.
300* Displays the current software version.
340 Enables or disables the Hold button (not supported in this
release).
400 Enables or disables the Call Forward feature.
401 Redials the last number.
420 Enables or disables the Transfer feature.
430 Enables or disables the Conference feature.
434 Allows you to enter your password.
440 Enables or disables the Forward Mail feature.
444 Enables or disables the Call Park feature.
446 Enables or disables the Do Not Disturb feature.
460 Displays the Call History menu on the Display Panel.
(continued)
Table 5 Feature Codes
Code Description
