A SERVICE OF

logo

SET VBRIDGE INTERFACE
2-291
SET VBRIDGE
INTERFACE
Use the SET VBRIDGE INTERFACE command to enable or disable connectivity
between a virtual bridge and the DMM. Virtual bridges continue to switch
traffic even when the virtual bridge interface is disabled.
A virtual bridge interface is automatically enabled after you assign an IP address
to the virtual bridge.
Format
Example
The following command disables connectivity between the DMM and virtual
bridge 12:
CB5000> set vbridge 12 interface disable
Related Commands
SHOW VBRIDGE
SHOW INTERFACE
vbridge The assigned virtual bridge number. Values are 1 through 240.
enable
Enables connectivity to the DMM.
disable
Disabled connectivity to the DMM.
set vbridge
vbridge
interface
enable
disable