Filter
Top Products
• To cancel the delay start and start the cycle immedi-
ately, press “Start/Pause” and then “Delay start”. Press
“Start/Pause” to start the cycle.
• To change the timer delay period, you must go through
the “Stop” position
and reprogramme your cycle.
The lid will be locked during the delayed start time. If you
need to open it, you must first pause the appliance by
pressing the “Start/Pause” pushbutton. After closing the
lid again, press the “Start/Pause” pushbutton.
Start of the programme
Press the “Start/Pause” pushbutton to start the cycle. The
corresponding light will come on green. It is normal for
the programme selector to remain stationary during the
cycle. The light corresponding to the current cycle is il-
luminated.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 minutes
Press the “Start/Pause” pushbutton : the corresponding
light will flash green while the appliance is paused. The
lid can only be opened around 2 minutes after the washing
machine has come to a stop. Press the “Start/Pause”
pushbutton again to continue the programme.
Modifying the programme in progress
Before making any changes to the current programme,
you need to pause the washing machine by pressing the
“Start/Pause” pushbutton. If the modification is not pos-
sible, the “Start/Pause” pushbutton flashes red for a few
seconds. If you still decide to change the programme, you
must cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn the programme
selector to the “Stop” position
.
End of the programme
The washing machine stops automatically, the “Start/
Pause” pushbutton goes out and the light “End of cycle”
comes on. The lid can only be opened around 2 mi-
nutes after the washing machine has come to a stop. Turn
the programme selector to the “Stop” position
. Re-
move washing. Unplug and close water inlet tap.
Standby mode
If the appliance is on but no commands are selected for
10 min before or after a cycle, it goes into standby mode.
All the lights go out and “Start/Pause” flashes slowly.
To exit standby mode, simply press any pushbutton or
turn the programme selector.
Programmes table
Programme / Type of washing Load/Time Possible options
Cotton Normal (cold - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table linen,
body linen, towels.
5,5 kg
140-150 min
Rinse hold, Prewash, Super quick, Rinse
plus, Delay start
Cotton Eco
1)
(40° - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table linen,
body linen, towels.
5,5 kg
145-155 min
Rinse hold, Prewash, Rinse plus, Delay start
Synthetics (cold - 60°) : Synthetic fabrics, body lin-
en,fab, coloured farics, non-iron shirts, blouses.
2,5 kg
90-100 min
Rinse hold, Prewash, Super quick, Rinse
plus, Delay start
Delicates (cold - 40°) : For all delicate materials, for
example curtains.
2,5 kg
60-70 min
Rinse hold, Prewash, Super quick, Rinse
plus, Delay start
Wool (cold - 40°) : Machine washable wool carrying
the labels “pure new wool, machine washable, does
not shrink”.
1,0 kg
55-65 min
Rinse hold, Delay start
Handwash (cold - 40°) : Very delicate items carrying
the “wash by hand” label.
1,0 kg
55-65 min
Rinse hold, Delay start
5