Zanussi ZWH 7162 J Washer User Manual


 
Control Panel
On the following page there is a picture of the control panel. It shows the programme selector dial as well as the
buttons, pilot lights and the display. These are presented by relevant numbers on the following pages.
1 2 3 4 5 6 7 8
10 9
1 Programme selector dial
2 SPIN button
3 OPTIONS button
4 PREWASH button
5 EASY IRON button
6 EXTRA RINSE button
7 START/PAUSE button
8 DELAY START button
9 DOOR LOCKED pilot light
10 Display
Table of symbols
Night Cycle
Rinse Hold
Child Safety Lock
Programme selector dial, spin speed button and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/or to se-
lect a programme.
Spin Reduction
By pressing this button you can change the spin speed of
the selected programme.
Available options:
Night Cycle
By selecting this function the machine will not drain the
water of the last rinse and all spinning phases will be sup-
pressed, so as not to wrinkle the laundry. This washing
cycle is very quiet and it can be selected at night or in
times with a more economical power rate. On some pro-
grammes the rinses will be performed with more water.
Before opening the door it will be necessary to empty out
the water. To empty out the water, please read the para-
graph «At the end of the programme».
Rinse hold
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the wa-
ter. To empty out the water, please read the paragraph «At
the end of the programme».
5