Filter
Top Products
16
At the end of the programme
The machine stops automatically.
The pilot light of button
5 goes off while the
phase light C illuminates. The door can be
opened.
If at the end of a programme there is water in
the tub, to empty out the water follow the
following instructions:
● turn the programme selector dial to «O»
● select the DRAIN or SPIN programme
● reduce the spin speed if needed, by means
of the relevant button
● press button 5
At the end of the cycle, turn the programme
selector dial to «O» to switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the formation
of mildew and unpleasant smells.
132970521.qxd 01/04/2008 11.55 Pagina 16