Filter
Top Products
42
Operating sequence
8. Select the Delay Start
Before you start the programme, if you wish to
delay the start, press the Delay Start button
repeatedly, to select the desired delay.
The relevant light illuminates.
This button makes it possible to delay the
starting of the washing programme by 3, 6,
and 9 hours.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
You can cancel the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by
pressing the Start/Pause button;
• press the Delay Start button once, the light
relevant to the selected delay goes off.
• press the Start/Pause button again to start
the programme.
IMPORTANT!
• The selected delay can be changed only
after selecting the washing programme
again.
• The door will be locked throughout the delay
time. If you need to
open the door, you must
first set the washing machine to PAUSE by
pressing the Start/Pause button and then
wait about 2 minutes untill the «Door» light
has gone off. After you have closed the door,
press the Start/Pause button again.
The Delay Start can not be selected with Drain
programmes.
Programme progress display
After having depress Start/Pause button, the
«Wash» pilot light illuminates and stays on
while the machine is working.
The «Door» pilot light indicates if the door can
be opened:
• light on: the door cannot be opened.
The appliance is running.
• light off: the door can be opened.
The washing programme is finished.
• flashing light: the door is opening.
When the programme has finished, the «End»
pilot light illuminates and the «Wash» light
goes off.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out. Before you make
any change, you must pause the washing
machine by pressing the Start/Pause button.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to Off and then to the new
programme position. The washing water in the
tub will not emptied out. Start the new
programme by depressing the Start/Pause
button again.
Interrupting a programme
Depress the Start/Pause button to interrupt a
programme which is running, the
corresponding light starts to flash. Depress
the button again to restart the programme.
Wash
Door
End
126.2936.33…ZWF615.qxd 15/5/08 11:44 Página 42